The latest unstable releases of Stratego/XT 0.17 support Mac OS X on Intel machines. An experimental installer is available. See the announcement on the mailing list.
Please note that Stratego/XT 0.16 does not support Mac OS X running on Intel machines.
Stratego/XT supports Mac OS X on PowerPC from release 0.11. The release page of the latest release contains links to binary distributions for Mac OS X.
The performance of Stratego/XT at Mac OS X on PowerPC is rather poor.
jmp_buf
) in the Stratego compiler. The size of a jmp_buf
depends on the architecture of the processor and unfortunately RISC processors need a very large jmp_buf
.
One of our master students (Dick Eimers) has installed Debian at a PowerMac6,3 and I've tried to build Stratego/XT on this machine. At first this wasn't very succesful. I was using FSF's GCC 3.3.4 and this resulted in the usual problems.
However, it works look a charm with GCC 3.4.1! Even more suprising to me is the performance, which is excellent. The jmp_buf
size at Debian/PowerPC is much smaller than at Mac OS X!
mbravenboer@mcflurry:~$ uname -a Linux mcflurry 2.4.25-powerpc #1 mer avr 14 15:38:38 CEST 2004 ppc GNU/Linux mbravenboer@mcflurry:~$ more /proc/cpuinfo processor : 0 cpu : 7455, altivec supported clock : 1249MHz revision : 3.3 (pvr 8001 0303) bogomips : 1245.18 machine : PowerMac6,3 motherboard : PowerMac6,3 MacRISC3 Power Macintosh board revision : 00000001 detected as : 287 (Unknown Intrepid-based) pmac flags : 00000000 L2 cache : 256K unified memory : 512MB pmac-generation : NewWorld jmp_buf size: 364
jmp_buf
size at same hardware, GCC 3.4.1 and running Mac OS X: 768
jmp_buf
size at my SuSE 9.0 at Pentium M system is 156.
Mac OS X is support with a patched GCC from StrategoXT 0.9.1. This patch has been implemented by Eelco Dolstra.
In Stratego/XT 0.17 we hope to remove nested functions in the C sources produced by the Stratego Compiler (See issue STR-119).